Hydraulic Straightening Machine For Metal H Beam Production Line

Quick Detail:

Applied for thick H-Beam wing plate straightening

Description:

HYJ-60B H beam hydraulic straightening machine Apply to the flange of the H-shaped steel plate thick correction, the scope of application, ability to work. Host floating around with a hydraulic roller, a feed side of the work-piece prior to the introduction into the host institution is to ensure that corrective work more smoothly.

Specifications:

1. Major technical Parameters

a. Width of the wing board: 200-800mm

b. Thickness of the wing board: 20-60mm

c. Min height of the former: 350mm

d. Straightening speed: 6.35m/min

e. Total power: 37kw

f. Drive motor: 22kw

g. Hydraulic drive motor: 15kw

h. Maximum system pressure: 32Mpa

i. Normal working pressure: 25Mpa

j. Materials of the work-piece: Q235A, 16Mn (When the work-piece being 16Mn, the straightening thickness is 70% of Q235A)

k. Relationship between the thickness and width

2. Provide goods and compose parts

a. Main frame of correcting machine: base, left-and-right frame, motor, deceleration machine, guide wheel, up roll, press roll.

b. Conveyor roller way: base, 14m roller way and so on.

c. Electric control: electric control box.

d. Spare parts: switch*2, wrench*1.

3. Performance

H beam hydraulic straightening machine is used for the correction of the flange of H beam. Through the lever principle and elastic recovery, it bends the flange of the I beam or H beam when the beam passing through the hole.

The equipment is made up of electric motor, reductor, driving wheel correcting device, initiative hoist cylinder, former, mainframe, stand, hydraulic system, front/back elevating roller rack of pendulum type and the electric control system. The correcting mechanism is compact, solid and easy to operate.

4. Technical files

a. Using manual of the machine (Include electrical schematic).

b. Shipping list.

c. The certification of the machine.

d. The basis of drawing of the machine.

About Us:

1. Main electric elements are Siemens / Schneider.

 Mr. Lu Wen

Tel: 86-510-82234202

Contact to this supplier